Facebook
Categories

Which Washer Do You Actually Need? 7 Types and Where Each One Goes

by Tianyu Fasteners
Nov 17th,2026 16 Views

Which Washer Do You Actually Need? 7 Types and Where Each One Goes

Washers are small, but they do a big job: spread load, protect surfaces, reduce loosening, and make bolts, screws and nuts perform better. Building a deck, anchoring steel, assembling equipment or just repairing something — the right washer makes the connection cleaner and stronger.

A washer is a thin plate, usually round, with a hole in the centre. It sits between the fastener head (or nut) and the material, distributing pressure and protecting the surface from damage.

The seven types

Type

What it does

Where it goes

Standard

Flat washer

Spreads load over a larger area; stops the head digging in

General fastening, wood, metal assemblies

DIN 125

Fender washer

Larger outside diameter for extra bearing surface

Thin sheet metal, oversized holes, soft materials

DIN 9021

Split lock washer

Cut and twisted to add tension and resist vibration loosening

Machinery, equipment, metal assemblies

DIN 127

Structural washer

Thicker, stronger, for high-load steel bolting

Steel framing, structural connections

EN 14399-6

Finishing washer

Countersunk shape so a flat or oval head sits neatly

Trim, cabinetry, furniture, visible fixings

—

Sealing washer

Rubber / neoprene / EPDM insert creates a weather seal

Metal roofing, siding, exterior panels

—

Square washer

More coverage and resistance to pull-through

Timber connections, post-and-beam, heavy wood

DIN 436

How to choose

  1. Start with the application. Everyday fastening → flat washer. Vibration → split lock washer or another locking method specified for the assembly. Soft material or oversized hole → fender washer. Outdoor or wet → a material and coating that match the exposure.
  1. Then the material. Zinc-plated for indoor or light duty; hot-dip galvanized for most exterior work; stainless where corrosion resistance is critical, especially wet or harsh environments.
  1. Then the size. The hole must fit the bolt or screw without being sloppy, and the outside diameter must give enough bearing surface. A wrong-size washer reduces holding power or damages the surface.

Three mistakes we see most

  • A standard flat washer under a structural bolt — wrong thickness and strength; use EN 14399-6.
  • A zinc washer on a coastal roof — the coating gives up long before the panel does.
  • A washer too small for an oversized hole — the fastener pulls straight through.

What we manufacture

Tianyu Fasteners produces flat, fender, split lock, structural, finishing, sealing (EPDM) and square washers — in carbon steel and stainless, zinc-plated, hot-dip galvanized or RUSPERT-coated, to DIN / EN standards, with MTC on request. Tell us the bolt, the material and the exposure, and we will match washer, coating and size. OEM and private-label ready, with flexible MOQs.

FAQ (for buyers and procurement)

Q: Which washer for a metal roof? A: A sealing washer with an EPDM insert — it seals the hole and stops water tracking under the head.

Q: Which washer for a structural steel connection? A: A structural washer to EN 14399-6 — thicker and stronger than a standard flat washer.

Q: Zinc or stainless? A: Zinc for dry indoor work; hot-dip galvanized for general exterior; stainless (A2/A4) for coastal or harsh environments.

Q: Can you supply washers matched to our bolts? A: Yes — send the bolt spec and we will match hole size, outside diameter and thickness.

Q: What are the MOQ and lead times? A: Trial batches and full container loads are both welcome; stock grades ship in 2–3 weeks, custom in 4–6 weeks after sample approval.

Contact us now for samples: support1@tianyufasteners.com. Explore our offerings at www.tianyufasteners.com.


Author: Song
Song focuses on product quality and works with our factory to deliver reliable fasteners European buyers can trust. He enjoys helping customers find the right screw and is passionate about a great experience with Tianyu Fasteners.